اندسیل CASING ENDSEAL

Model "S" Standard Pull-on End Seals are flexible and easily installed on customer specified casing/carrier pipe combinations. Manufactured  from 1/8" thick synthetic rubber, Model "S" end seals are extremely robust, resistant to wide variations in environmental conditions while eliminating the possibility of foreign material entering the opening between carrier and casing pipes. Included with Model "S" End Seals are two appropriately sized hose clamps which are used to secure the rubber material around both carrier and casing pipes. Installation is quick and easy with only a screw driver needed for tightening the hose clamps.

The accordion-bellows design of this seal permits movement of the carrier pipe without damage to the seal. Its unique design facilitates installation and prevents damage  from backfill. Multiflex End Seals are available in sizes  from 2" x 4" through 56" x 64". Where it fits over the end of the casing, the seal is 3/8" thick and the minimum thickness over the balance is 3/16". Circumferential ribs molded in the inner surface.

Benefits/Features
Quick and Easy Installation
Carrier Pipe Does Not Need To Be Perfectly Centered Within Casing
Screwdriver Is Only Tool Required for Installation
Designed To Last for the Life of the Piping System
Heavy Duty Hose Clamps Supplied.

Material Specifications
EPDM 60
Material: EPDM 60
Thickness: 1/8" (3.18mm)
Color: Black
Temperature: 250° F. (121° C.)
304 Stainless Steel Bands
w/Worm Screws
Sizing Per Customer Specifications


Model "W" Wrap Around End Seals

PRODUCT BRIEF

Model "W" Wrap Around End Seals are designed to accommodate customer supplied specifications so they may be used for any size casing/carrier differential. Manufactured  from 1/8" thick specially compounded synthetic rubber, Model "W" end seals are extremely robust, resistant to wide variations in environmental conditions while eliminating the possibility of foreign material entering the opening between carrier and casing pipes. Included with Model "W" End Seals are two appropriately sized hose clamps which are used to secure the rubber material around both carrier and casing pipes. Installation is quick and easy with only a screw driver needed for tightening the hose clamps. Model AW Casing End Seals are of the highest quality and are manufactured to industry standards. We hereby certify that the materials supplied

were manufactured by Advanced Products & Systems .

Benefits/Features
Custom Made to Order.
Quick and Easy Installation.
Carrier Pipe Does Not Need To Be Centered Within Casing.
Can be installed on   exist ing casing installations.
Screwdriver Is Only Tool Required for Installation.
Designed To Last for the Life of the Piping System.
Heavy Duty Hose Clamps Supplied.
Self-Curing Seam - simply remove.

                                       

EPDM 60
Material: EPDM 60
Thickness: 1/8" (3.18mm)
Color: Black
Temperature: 250° F.(121
304 Stainless Steel Bands
w/Worm Screws
Sizing Per Customer Specifications
Material: Buna-N
Thickness: 1/8" (3.18mm)
Color: Black
Temperature: 212° F.(100° C.)
304 Stainless Steel Bands

w/Worm Screws
Sizing Per Customer Specifications
Material: Neoprene
Thickness: 1/8" (3.18mm)
Color: Black
Temperature: 170° F. (77°C.)
304 Stainless Steel Bands
w/Worm Screws
Sizing Per Customer Specifications


End Seal Physical Properties
Temperature   limit s: -20oF to +230oF
Color: Black
Finish: Smooth
Durometer: 60 +/-5
Tensile Strength: 1800PSI
Elongation: 300%
Specific Gravity: 1.15 - 1.40 ASTM D 71
Hydrocarbon Content: 50% Min. ASTM C 990
Solids Content: 99% minimum ASTM D 6
Cone Penetration @ 25°C (77°F) 55 to 85 ASTM D 217
Low Temperature Flexibility No cracking or ASTM C 765
adhesion loss at-23°C (-10°F)
Service Temperature Range: -40°F to 250°F

Warranty
All products are warranted against failure caused by manufacturing defects for a period of one year. Any product  found to be so defective and returned within one year  from date of shipment will be replaced without charge. The above warranty is made in lieu of, and we disclaim, any and all other warranties, expressed or implied, including the warranties of merchantability and fitness for a particular purpose, and buyer agrees to accept the products without any such warranties.